- Clear glass
- Supplied only
- Made to measure
- Various thicknesses
- Various types
The glass would be supplied to customers measurements only and we suggest that you take notice of the details below. For more details and technical support please call our experienced sales team.
Glass Bevel - To ensure maximum performance the glass should be cut with a flat polished edge and a bevel of 45 degrees. See second image for details.
Standard Glass - For standard glass panels of 10, 12 and 15mm the polished flat edge of the glass should be cut to a maximum width of 6.5mm for 10mm glass, 8.5mm for 12mm glass and 11.5mm for 15mm glass.
Laminated Glass - For laminated glass panels of 10.8, 12.8 and 15.8mm the polished flat edge of the glass should be cut to a maximum width of 6.5mm for 10.8mm glass, 8.5mm for 12.8mm glass and 11.5mm for 15.8mm glass.
PLEASE NOTE - It is recommended to ask the glass supplier to cut 0.5mm smaller on the flat edge than is stated for fit and function purposes. it is ok to have a smaller flat edge, a larger flat edge than stated can cause the joint NOT to bond.