The Forterra Brick Atherstone Red Stock is a popular red stock type brick with a light textured face on all sides so ideal for single skin walls where the face is visible both sides. This brick can be used in most masonry situations. These bricks have a high strength with a low water absorption and are easy to handle and lay. Foretta bricks require little to no maintenance and can be recycled at the end of their use. They also contribute to thermal mass, resulting in buildings which need less energy for heating and cooling.
Dimensional tolerance - T2
Dimensional range - R1
Soluble salts - S2
Water absorption - 13%
Manufactured to BS EN 771-1
Brick contains recycled content
Range availability is dependent on local demands and not all products are stocked at all branches
PLEASE NOTE: The image is for representative purposes only, if unsure please order a sample
Delivery Information
We deliver bricks on a pallet using our standard network service. Deliveries are made to the kerbside—meaning the closest access road to your site.
For a successful delivery, the site must have a hard, flat surface to allow the tail lift to sit flush and enable a pallet truck to unload the goods. Please note, we cannot lift pallets over walls or fences, nor can we carry them to the rear of the property.
If you require a different delivery method, such as Hi-ab, crane, or handball offload, please contact us before placing your order to discuss your options and any additional costs.
In case a delivery is turned away due to incorrect vehicle selection or undisclosed site access issues, a failed delivery charge may apply. However, we will always contact you first to find a better solution.
Specifications
EAN | 5055667540227 |
---|---|
Dimension | 215mm x 102.5mm x 65mm |
Height | 65mm |
Length | 215mm |
Width | 102.5mm |
Pack Size | 495 |
Type | Facing Brick |
Colour Name | Red |
Frost Resistance | F2 |
Water Absorption | 13% |