GLUESORBA® Spray Can Contact Adhesive - 500ml

This adhesive comes ready to use in 500ml spray cans. It should be held 150mm to 300mm away from the surface at a constant 90-degree angle. It is recommended that the adhesive is applied at room temperature of approximately 21 degrees and in well ventilated conditions.

The adhesive should be applied vertically on the panel and horizontally on the ceiling/wall. The panel and ceiling/wall should be fully coated and then allowed to dry for 3-5 minutes before bonding the surfaces together. The panels should be placed accurately into position as the adhesive creates an immediate bond upon contact. Coverage should be 100%.