IsoRubber Base 6mm Sound Insulation System (10000mm x 1000mm) 10m2

Isorubber Base is an acoustic isolation and vibration reduction mat. It is primarily used in concrete and timber floor systems to achieve Approved Document Part E compliance, but can also be used in general sound proofing and noise reduction applications. It is also the main acoustic component of the Robust Detail E-FC-4 and E-FC-14 constructions.

Roll size:†6mm x 1m x 10m (10m2)

Roll Weight:†37kg (14 Rolls per pallet)

Density:†635kg/m≥

Robust Detail E-FC-4

Robust Detail E-FC-4 is an under screed acoustic insulation system for precast plank floors. It consists of Isorubber Base resilient acoustic insulation below a sand & cement or flow screed with Isoedge 6/260 perimeter separation strip and a Metal Frame or Isosonic acoustic ceiling treatment. This construction can also be pre-completion tested to achieve BREEAM credits.

Robust Detail E-FC-14

Robust Detail E-FC-14 is an under screed acoustic insulation system for precast plank floors. E-FC-14 is the first under screed solution to provide 3 Code for Sustainable Homes Credits upon registration. These credits are also applicable under the BREEAM multi-residential category, pre-completion testing is required for other BREEAM categories. E-FC-14 consists of Isorubber Code resilient acoustic insulation below a sand & cement or flow screed with Isoedge 6/260 perimeter separation strip and a Metal Frame ceiling supported on Isosonic Ceiling Cleats or an Isosonic Ceiling treatment.

Robust Detail E-FC-18

Robust Detail E-FC-18 is an under screed acoustic insulation system for insitu concrete floors that is ideal for multi storey projects. It consists of a resilient acoustic insulation below a sand & cement or flow screed with a perimeter separation strip and a Metal Frame ceiling treatment.

This Robust Detail provides a choice of proprietary under screed acoustic insulations that can be used including Isorubber Base. It also allows for party walls to be built off the structural slab, without the need for pre-completion testing.

Isosonic Timber Floor

The Isosonic Timber Floor System provides excellent acoustic results in new build and refurbishment applications. It consists of Isorubber Base resilient acoustic insulation on a structural timber deck with mineral wool between the joists and an Isosonic acoustic ceiling treatment.

Isosonic Basefloor

The Isosonic Basefloor system is an under screed acoustic insulation and ceiling treatment for precast plank, in-situ concrete, steel composite and beam & block floors for use in new-build and refurbishment applications. It consists of Isorubber Base resilient acoustic insulation below a sand & cement or flow screed with Isoedge 6/260 perimeter separation strip and a Metal Frame or Isosonic acoustic ceiling treatment. These constructions can also be pre-completion tested to achieve BREEAM credits.

Isosonic Timber Conversions

The Isosonic Timber Conversion Systems provide a range of solutions to suit most acoustic refurbishment applications. They consist of various overlay products, including Isorubber Base resilient acoustic insulation, over existing timber floor structures. All of the timber conversion systems incorporate mineral wool between the joists and an Isosonic acoustic ceiling or resilient bar ceiling treatment below.

Product Benefits:

• Continues to perform for the life of the building.
• Suitable for use with under floor heating.
• Simple installation.
• 100% recycled or diverted landfill rubber.
• Over 4 million m2 installed in the UK.